Відео

Thank you for your question. The short answer is yes, stress monitoring will still work. Wearing it during sleep, however, will create a better understanding of the full range of your stress vs. relaxation states since stress levels are typically lowest during sleep. For more information on stress tracking, take a look at the following link. I hope this helps. www.garmin.com/garmin-technology/health-science/stress-tracking/

Thank you of your question. Yes, you can use the GPSMAP 79 series for land navigation, but you will need to purchase the appropriate mapping if you want detailed and/or routable maps.

Thank you for your comment. Sorry to hear that your History database is missing. I know you said you reported the issue, but if you haven't done so please reach out to our Product Support team at 800-800-1020. They will be happy to troubleshoot and assist.

@@GarminRetailTraining Thank you for replying and providing a contact number. Greatly appreciated. I will follow up on the issue and if there is any solution I'll share it. Again, thank you.

Thank you for your comment. Sorry to hear that you are experiencing issues with waking up your Index scale. I know that must be frustrating. Please reach out to our Product Support team at 800-800-1020 or support.garmin.com. They will be happy to troubleshoot and assist.

Thanks for your question! Attached is a link that will take you to the specs page for this product. From there scroll down till you see sensors, and you will see the full list. www.garmin.com/en-US/p/1277573/pn/010-02803-80#specs

Thank you for your comment. Sorry to hear you are having connection issues with your Edge 840 and accessory devices. Please reach out to our Product Support team at 800-800-1020 or support.garmin.com. They will be happy to troubleshoot and assist.

@@GarminRetailTraining Thank you for your response. I did figure out the battery in the cadence sensor is a 2025 and should be a 2032. The thickness is different so there may be a physical connection issue there. Weird that once it connected it worked though. I'll get a proper battery for it tomorrow. The Di2 connects well now but the Radar is still taking a long time. Speed sensor is working too. The devices say in the details on the 840 that Ant+ is the protocol connection but isn't it really bluetooth, because they don't connect until they wake up and that little led starts to flash. Scratching my head over this. When I had the 830 bike computer I never had problems but this 840 has been a ruff learning curve. This is probably all my own stupid fault, I know Garmin is the best gear out there. I had an early version of Wahoo a long time ago and hated it.

Thank you for your question. If you are not getting the option to enter the projectile weight for each session, select SETTINGS > PRO SETTINGS. Make sure the PROJECTILE WEIGHT ENTRY is "Enabled". If it still doesn't give you the option to enter in the projectile weight for each session, please reach out to our Product Support team at 800-800-1020 or support.garmin.com. They will be happy to assist. I hope this helps.

Thank you for your question. The device used in the video is the Epix Pro. It has an AMOLED display, which is more brilliant than the MIP display in the fenix 7 Pro Sapphire Solar.

@@GarminRetailTraining Damn... I wish I had known that before, I would have bought that one.

Maybe you should be more happy with the Fenix. Your battery last longer. ;)​@@marlonoreilly

Thank you for your comment and question. While our watches can pair to multiple devices, they can only be "connected" to one phone at a time.

Thank you for your question. No. With the AMOLED display the only color option for the background color is black with the customizable watch faces.

@@GarminRetailTraining hello again, do you know if the fenix 7 and other clocks like this one in general sometimes lag slightly when you scroll thru the apps?

Thank you for your question. Yes, you have the ability to add multiple time zones and quickly select the time zone you want to view on the watch.

Sorry to hear your device keeps disconnecting from the Garmin Connect app. Please reach out to our Product Support team at 800-800-1020 or support.garmin.com. They will be happy to troubleshoot and assist.

Thank you for your question. If you navigate to the below link, scroll down and click on "Compatible Devices". You will see the full list of watches that are compatible with the Garmin Race Widget. I hope this helps. support.garmin.com/?faq=TW359dqkIVAI0OGRpakmT6

Thank you for your question. Yes, the Descent Mk3 series has a host of features for activities other than diving. In fact, it has all the same outdoor activities and features as the fenix 7 series. The following link will take you to the Descent Mk3 specs page where you can see all the features that it has. I hope this helps. www.garmin.com/p/852183/pn/010-02753-03#specs

Thank you for your question. Yes, it can be used on a motorcycle. However, it does not come preloaded with road maps. Those would need to be purchased separately, as well as a handlebar mount. Also, it will not include all of the motorcycle specific navigation features like our zumo series devices. The zumo series is designed specifically for motorcycles with included maps, mount, and motorcycle power cable. For more information and a comparison of both products to see which one will best fit your needs, you can find them on Garmin.com. I hope this helps.

@@GarminRetailTraining Many Thanks for your reply! Appreciated!

Thank you for your comment. Sorry to hear that your Daily Suggested Workouts are not being displayed. Please reach out to our Product Support team at 800-800-1020 or support.garmin.com. They will be happy to troubleshoot and assist.

@@GarminRetailTraining Its a known bug - reported on the beta forums during the 17.xx beta program and has remained unfixed throughout the whole program and the corresponding 17.20 and 17.23 public releases

Its very easy to show the Power Profile bug Go to your Run activity on the watch, and change its power profile to something else - either via Connect or the watch Then go back to the watchface Go back to the RUn activity and start it, and you'll see it will go back to the Normal Power Profile. Bug was reported in 17.10 beta and persisted throughout all beta updates until they released 17.23 as final. No word from Garmin on any timescale of a fix.

Can confirm! Was participating in Beta 17.xx with testing for over 9 weeks now and reporting and Garmin went public with A LOT bugs knowing beta was a total mess but they did not care! Beta testing got worthless as Garmin is not listeing and nor taking customers serious! - DSW disappearing the next day once run based on DSW was done - calendar crashing (due to DSW bug) - power profiles being reset after EVERY activity - crashes/connectivity issues Check Garmin forum for more details Again...avoid Updating to 17.23 on Fenix 7/Epix/Enduro 2 and stay on 16.22

17.23 is a total mess. It broke DSW on my Epix Gen 2 Pro and no statement from Garmin

Thank you for your question. No, Physio TrueUp is already enabled by default for devices that are compatible with "Unified Training Status", such as the Forerunner 255 in this video. For al other devices, it is a prompted step during the Garmin Connect app pairing process. For more information, check out the below links. I hope this helps. Physio TrueUp link: support.garmin.com/?faq=g4zagaDmtJ0luYPPvEuwz9 Unified Training Status link: support.garmin.com/?faq=EjPECQK58qA0xzJ5X74vm7